25 NB to 800 NB flanged end.
The outer casing is fabricated out of Mild steel,Alloy steel or casting(for less than 200 nb) to withstand high pressure. The elements are generally made of perforated sheet & wiremesh of SS-304, SS-316 etc. as per application.
Cast Steel 100 Bar(Max) @ 200 Deg.C max., Alloy Steel 100 Bar(max) @ 260 Deg. C. max.
Range – 10 micron to 500 micron
It is suitable for any type of viscous liquid (Lube Oil, Hydraulic Oil, Other Petroleum Oil, Coolant Fluid, Water / Oil Emulsion) at constant pressure drop.
It is specially designed where uninterruption flow is required. It is made of two parts with 2 nos. 3 way valves or 4 nos. Butterfly valve for maximum utility.Optional feature like pr. drop indicator (audio & visual)can be provided for change over. Complete automation also can be supplied for change over.
25 NB to 600 NB flanged end.
Range – 10 micron to 500 micron.
Cast Steel 100 Bar(max) @ 200 Deg. C max. , Alloy Steel 100 Bar(max) @ 200 Deg. C Max.
The shells are made of fabrication or casting (less than 200 nb)to withstand high pressure. The elements are generally made of perforated sheet & wire mesh of AISI-SS 304, AISI-SS 316 etc. as per application
It operates on edge filtration principle and no replacement of element is required.
It is of 2 types, Manual and Automatic. In manual type a handle is fitted on the top which have to be manually rotated to clean the element., in automatic type rotating is done by motor itself to clean the element.
The outer casing is made of fabrication or casting to withstand high pressure. The elements are made of metal plates hence no replacement of element is required.
It is suitable for any type of viscous liquid (Lube Oi, Hydraulic Oil, Other petroleum oil, coolant fluid, water / oil emulsion) etc.
It is specially designed for uninterruption flow of liquid. There is no need to clean the elements. Cleaning is done by automatic flushing by differential pressure initiated by D.P SWITCH,Motor etc.
The outher casing is made of fabrication or casting to withstand high pressure. The elements are generally made of wiremesh of SS-304, SS-316 etc. as per application.
The outer casing is made of fabrication or casting to withstand high pressure. The elements are made of metal plates hence no replacement of element is required.
It is suitable for raw water, D.M water, Coolant Fluid, Water / Oil Emulsion, oil at constant pressure drop.
Item Code: BSC01
These filters safeguard the performance and service life of essential and expensive hydraulic components due to their high standard of quality.
It is suitable for any type of viscous liquid (Lube Oil, Hydraulic Oil, Other Petroleum Oil, Coolant Fluid, Water / Oil Emulsion) at constant pressure drop.
3, 5, 10 and 20 micron nominal.
5 to 300 Bar.
The outer casing is made of fabrication or casting to withstand high pressure. The elements are generally made of hydraulic paper (cellulose based). Glass fibre paper with supporting wire mesh of SS-304, SS-316.
15 NB to 450 NB (Screwed & Flanged End).
8.92 Bar @ 179 Deg. C (Hot) to 100 Bar @ 37.8 Deg.C (Cold).
The outer casing is made of fabrication or casting to withstand high pressure the elements are generally made of perforated sheet & wire mesh of SS-304, SS-316 etc. as per application.
These filters are generally used for in-line liquid filtration system.
These filters are generally used for Oil Filtration Plant system.
Available: In stock
At vero accusamus et iusto odio dignissimos blanditiis praesentiums dolores molest.
